Wooden joist slabs is a common type of floor in residential buildings. Higher demand and production of residential buildings increases the possibilities of profiting by optimizing the system of joists in a variety of areas. Spring and deflection is something most people can relate to since it?s not that uncommon to hear furniture rattle when you walk over a wooden floor. To remove the presence of those kinds of vibrations the system of joists have to be made stiffer than the standard joist construction that is used in today?s constructions.

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

Title: Kvarteret Tvättstugan, an apartment building with massive wood construction. A thesis about acoustic and fire requirements and a comparison of energy and moisture aspects. Earlier restrictions in the Swedish legislation have resulted that only a small percentage of the apartment buildings that have been built are designed with a massive wood construction. It has been allowed to build unrestricted with wood since 1994 as long as the function of requirements are fulfilled. This change in the rules together with the great environmental benefits of wood has led to that more companies choose to build apartment buildings with wood. One of these companies is Folkhem Production AB.

My Finnish grandfather had a passion for architecture, eventhough he wasn?t an architect. In the end of the 1950s he builta wooden summerhouse on a lot outside of a small villagecalled Lempäälä, close to the city of Tampere. Today the lotbelongs to my mother. Every time I visit our summerhouse, itmakes me want to do as my grandfather did ? to build a smallhouse next to it.My project is a proposal for a wooden house on mymothers lot.

Shopping malls have been growing in numbers during the last few decades. As an effect, consumers are increasingly placing a greater amount of their purchases under one roof. The problem is that stores within these malls have to fight for the consumers' attention in competition with all the other stores. Thus, making consumers noticing their store is critical for success. Creating attention through floor advertising could be a potential way of doing so.

The purpose of this of this essay is to explore the construction of a conservatory that is livable allyear around. When you build a conservatory there are several factors that need to be regardedthat usually are of no importance when you build a regular conservatory. The glassed facadeneeds to have a very good U-value and all the parts of the facade need to be isolated and theconstruction needs to prevent thermal bridges.In this essay we will start by looking at the shape of the conservatory. Due to the façade consistsof glass the conservatory will need to have a good ratio between the area and the façade so thatthe heat losses will be at a minimum. However, due to the fact that one of the sides of the façadeis connected to the warm house, you quickly realize that the shape of the conservatory is of noimportance.There are two common ways to build a foundation for a conservatory, a molded concretefoundation and isolated wooden beams.

This research analyzed differences in measurements of magnetic field strength and frequency response in five audio induction loops installed in rooms of wooden construction materials and five audio inductive loops installed in rooms of steel reinforced concrete constructions. The inductive loops were installed at floor level and the measurements were made at the listening height of 1.2m. Measurements of background noise, field strength and frequency response were made at fifteen different measurement points across the room. The research measurements showed that there are differences in field strength and frequency response between these two conditions, whether the audio induction loop is installed in a wooden construction or the audio induction loop is installed in a reinforced concrete construction. The results had a significance level of p=0,05..

This study was carried out in Jordan with the purpose to investigate the bacterial microflora of egg shells from cage systems and from deep litter floor systems. Another aim wasto get a general impression of the hygiene, at farm level, of egg production in Jordan andthe factors affecting it.Eggs from two cage systems and three floor systems were analyzed, regarding bacterialcontamination of the egg shells. Egg samples were taken from the storage room, the eggcradle in the cage system and from the nest and floor in the floor system. To get a generalimpression of the hygiene at the farms, swab tests and air tests were performed. Swab testswere performed with a sterile cotton swab at the same units as the eggs were sampled andair tests were performed by opening petri dishes where the hens were staying.

In the country of Jordan, egg production is very important economically, but several bacte-ria are involved in food borne diseases transmitted from eggs or other poultry products. The most important are Salmonella spp., Campylobacter jejuni and Escherichia coli. In Jordan two different housing systems are used for hens in large scale egg production; con-ventional cages and litter floor systems. Eggs from four different farms were analysed and compared to see if a difference could be found regarding the presence of pathogenic bacte-ria on the egg surfaces between these two systems. Total number of aerobic bacteria was analysed, the presence of Salmonella spp., C.

The aim with the project was to portray something to step on. Its purpose has been to experiment and explore the interaction between pattern, structure, material and colour for something to be applied on a floor. Focus has been on esthetic expression and not the creation of some¬thing for a specific environment or audience. My goal was also that this project would illustrate the importance of the floor to create a certain atmosphere in a room.The project was divided into three phases. The first one was the experimenting and exploring phase, where the goal was to find an expression.

Floor signs in stores have become a more common phenomenon during past years. The problem is that the knowledge about these signs is limited and the actual effects are unknown. This lack of knowledge can have a negative impact on store performance and marketing efforts. The purpose of this paper is to examine the effects of floor signs on consumer attitude and behaviour. The study was conducted in two grocery stores, where the movement pattern of 39 501 customers was recorded over a four week period.

Floor surface in pig facilities can have an impact on animal welfare and pig health, as it can cause the pig physical damage and thereby increased risk of infectious diseases and lameness. The development of pig housing systems has resulted in a decreased use of bedding. It seems hard to find the optimal floor in farrowing pens, as it must suit both the sow and piglets. The floor friction needs to be adequate to avoid slips and at the same time should the floor be non-abrasive. Abrasions and lesions caused by the floor are not only causing the animal suffering, but are also negative from an economical aspect.

About 80 % of all Swedish dairy cows are kept in tie-stalls, but loose housing is increasing, probably because it is more profitable for the farmer. The design of the floors is of cruicial importance to the cows well-being. Traditionally, the most common type of floor in the alleys of a cubicle system still is a slatted manure-draining floor made of concrete. The typical Swedish design has 125-mm slats and 40-mm slots, maximally. With too wide slots, there is an increased risk of injuries to the claws when the cow makes a hasty move.

The purpose of this study was, if possible, to find a housing system for growing bulls that was as optimal as possible for the animal welfare. In order to select housing systems you must take into account the size of the group, body weight and the type of floor. Seven of the international most common housing systems were compared, straw bedding, deep straw bedding, sliding straw bedding, concrete slatted floor, rubber coated slatted floor, cubicles and feeding cubicles. Studies that have examined the proportion of tail, claw and leg injuries and the presence of unnatural behavior in the different systems. In summary, all studies showed that soft underlay were beneficial for the animals in terms of the proportion of bone lesions and swellings.

The incidence of damage to the claws and legs in piglets caused by the floor in farrowing pens is a widely known problem and very common in today's pig herds. Although the association between floor and damage has been known for over 35 years, no suitable solution has been found to reduce the negative impact. The purpose of this study was to make a literature study to document the experiences of the use of different types of flooring in farrowing pens and also, in an own study, examine if soft floor in farrowing crates could lead to reduced damage to the claws and legs in piglets compared to concrete floor. The study was conducted in two herds, A and B. In each herd, farrowing pens with concrete floor and concrete floor with polyurethane coating were compared.